[Paste a real Google review here, word for word.]
Burst pipes & leak detection
The leaks you can see are the easy ones. It is the slow leak inside a wall or under a slab that quietly wrecks a floor and doubles your water bill.
Get a price
Request a quote online
Four things and we come back the same day with a fixed price. If it’s urgent right now, ring instead of typing.
Burst pipes & leaks
Find it before it finds your floor
A pipe that bursts announces itself. A pipe that weeps does not — it soaks into a wall cavity or under a slab for months, and the first you know is a damp patch, a musty smell or a bill that has jumped for no reason you can name.
The simplest test costs you nothing: turn every tap off, then look at your water meter. If the dial is still moving, water is going somewhere. We find where without opening walls that did not need opening, then tell you what the repair involves before we start.
Reviews
What our customers think
Why it happens
Why pipes fail around here
Six causes account for most of the leaks and bursts we find across the northern suburbs.
Corroded galvanised pipe
A great deal of pre-1970s housing across Coburg, Brunswick, Preston and Pascoe Vale still has galvanised steel supply pipe, rusting from the inside until the wall gives way.
Failed flexi hoses
The braided hoses under sinks and basins have a service life of around ten years. When one lets go it does not drip, it runs at full mains pressure.
Ground movement
Reactive clay soil swells and shrinks with the seasons. Over years that flexes buried pipework until a joint opens or a line cracks.
Poor previous work
A joint that was never quite right, a nail through a pipe during a renovation, or a new bathroom teed off a supply line that was not up to the extra demand.
Water hammer
That bang when a tap shuts. It is a pressure spike travelling through the pipework, and repeated over years it works joints loose.
Age and pressure
Thin-wall copper under high mains pressure eventually pinholes. Common in the same era of housing and rarely just the one spot.
What we do
Our leak and burst pipe service includes
Burst pipe repair
Water isolated, the failed section cut out and replaced properly rather than clamped.
Leak detection
Locating a hidden leak without opening every wall between you and it. Starts with a meter test, so we confirm water is genuinely being lost before anyone starts cutting.
Ceiling and wall leak repairs
Tracing a stain, a blistered patch or a drip at a downlight back to what is actually leaking, which is often not directly above it.
Low water pressure
Weak flow at the shower, or two outlets that cannot run at once. Usually a corroded supply line, an undersized run added during a renovation, or a valve never fully reopened. We pressure test and quote only the section that matters.
High water bill leak checks
A bill well up with no change in how you use water almost always means something is running where you cannot see it. Ten minutes at the meter settles whether that is the case before any wall is opened.
Slab leak detection
Finding leaks under concrete, and telling you honestly what access will involve.
Flexi hose replacement
Replacing the ones past their life, before they are the emergency.
Galvanised pipe replacement
Swapping failing steel supply lines for copper, restoring pressure at the same time.
Worth knowing
Insurance and hidden leaks
Most home policies cover the damage a burst pipe causes but not the pipe itself, and many require you to have acted promptly once you knew. That makes the date you first noticed a damp patch worth writing down. We photograph what failed and give you a written description of it, which is usually what an insurer asks for.
How you’ll know
Signs of a leak you cannot see
A hidden leak gives itself away in small ways long before it does visible damage. Any one of these is worth a phone call.
- A water bill noticeably higher with no change in how you use water
- The water meter still turning with every tap in the house off
- A damp patch, blistering paint or a musty smell in one room
- A warm patch on the floor, which points to a hot water line under the slab
- Reduced water pressure that came on gradually rather than suddenly
Why us
Why Melbourne’s north trusts us
- No call-out fee, so having us look at it costs you nothing
- A fixed price agreed before we start, and that is the price you pay
- Priced by the job rather than the hour, so our slowness is our problem
- The plumber who quotes the job is the plumber who does it — no subcontractors
- Compliance certificate on work over $750 and a written workmanship guarantee
- We tell you when something can wait, instead of selling you an emergency
Find the leak today
Same-day service
Ring before the afternoon and we will almost always be there that day.
$0 call-out fee
No charge to turn up and look. You only pay for work you agree to.
Fixed price up front
The number is agreed before anything starts. No hourly surprises.
Where we work
We service all of Melbourne’s northern suburbs
Fawkner, Coburg, Glenroy, Pascoe Vale, Reservoir, Preston, Brunswick, Campbellfield and everywhere within 20km. Not sure if you are in it? Ring and we will tell you straight.
Get it sorted
Same-day service. $0 call-out fee.
Ring us for anything urgent. Everything else, send the details and we’ll come back with a fixed price.