No call-out fee · Same-day service across Melbourne’s northern suburbs

0449 556 421
PLATINUMPIPEWORKS
HomeServices Contact Call 0449 556 421

General plumbing & small repairs

The jobs everyone puts off. A dripping tap, a toilet that never stops running, a shower that will not hold a temperature. Small, cheap, and quietly expensive to ignore.

$0Call-out fee
Same daySeven days a week
FixedPrice up front
GuaranteedWorkmanship in writing

Get a price

Request a quote online

Four things and we come back the same day with a fixed price. If it’s urgent right now, ring instead of typing.

Call 0449 556 421

Your details come to us and nowhere else.

General plumbing

The jobs that are cheap now and dear later

A tap dripping once a second wastes roughly 20,000 litres a year. A toilet with a failed outlet seal runs continuously and can put through hundreds of litres a day without ever overflowing or making a mess. Neither is dramatic. Both are on your bill every quarter.

These are the cheapest jobs we do, and there is no call-out fee, so having us look costs you nothing. If you have several small things pending, get them done in one visit — four taps in one trip is substantially cheaper than four separate call-outs, and we would rather tell you that than come back four times.

Why it happens

What has actually failed

Six parts account for nearly every small plumbing repair, and all of them are inexpensive.

A dripping tap

On a traditional tap, a rubber washer presses onto a brass seat to stop the flow. Rubber perishes. This is the most common cause and the cheapest to fix.

A tap that drips again after a new washer

Here is why your last washer did not last. If the brass seat is pitted, a new washer cannot seal against it. We re-seat the tap while we are in there, which is why our repairs hold.

A stiff or dripping mixer tap

Mixer taps have no washers — they use a ceramic disc cartridge. When one wears it gets stiff, drips from the spout, or stops holding temperature.

A toilet that runs between flushes

The rubber seal at the bottom of the cistern hardens with age and stops seating, so water creeps into the bowl and the inlet valve keeps topping it up. This is the running toilet, by a wide margin.

A cistern that won’t stop filling

The valve that refills the cistern and is meant to shut off at a set level. When it wears it either never quite closes or takes minutes to refill.

A toilet that rocks or leaks at the base

A toilet that rocks is working its seal loose every time it is used, leaking slowly under the pan where you cannot see it.

What we do

Our general plumbing service includes

Leaking and dripping taps

Washers, seats and spindles — re-seated so the repair actually lasts instead of dripping again in a month.

Toilet flush and cistern repairs

A cistern refilling between flushes quietly wastes more water than most people expect, and a weak flush usually means the same parts. Outlet seals, inlet valves and dual-flush mechanisms.

Leaking toilet repairs

A pan that moves when you sit on it will leak at its base sooner or later. Lifted, cleaned back and reset on a new seal.

Mixer tap repairs

Kitchen and bathroom mixers that have gone stiff, drip, or lost temperature control. Usually the cartridge inside rather than the tap itself.

Shower mixers

Cartridges and diverters, almost always without removing tiles.

Tapware replacement

New tapware fitted, including checking the isolation valves behind it still work.

Outdoor and garden taps

Seized, dripping or snapped garden taps replaced, including the wall flange and the isolation behind it.

Appliance connections

Dishwashers, washing machines, fridge water lines and outdoor taps.

Worth knowing

Book several jobs in one visit

Most households have three or four of these pending at once — a tap, a toilet, a shower that has never been right. Getting them done in one booking costs substantially less than four separate visits, because you are paying for the work rather than the travel. Tell us everything on the list when you ring and we will price the lot.

How you’ll know

Small faults worth ringing about

None of these will flood your house. All of them get worse and more expensive, and most are fixed in one short visit.

  • A tap that drips after you have turned it off hard
  • A tap that squeals, shudders, or needs two hands to stop
  • A shower that runs hot then cold, or will not hold a temperature
  • A cistern you can hear refilling long after the flush
  • A toilet that rocks or moves when you sit down

Why us

Why Melbourne’s north trusts us

  • No call-out fee, so having us look at it costs you nothing
  • A fixed price agreed before we start, and that is the price you pay
  • Priced by the job rather than the hour, so our slowness is our problem
  • The plumber who quotes the job is the plumber who does it — no subcontractors
  • Compliance certificate on work over $750 and a written workmanship guarantee
  • We tell you when something can wait, instead of selling you an emergency

Get the small stuff sorted today

Same-day service

Ring before the afternoon and we will almost always be there that day.

$0 call-out fee

No charge to turn up and look. You only pay for work you agree to.

Fixed price up front

The number is agreed before anything starts. No hourly surprises.

Where we work

We service all of Melbourne’s northern suburbs

Fawkner, Coburg, Glenroy, Pascoe Vale, Reservoir, Preston, Brunswick, Campbellfield and everywhere within 20km. Not sure if you are in it? Ring and we will tell you straight.

Get it sorted

Same-day service. $0 call-out fee.

Ring us for anything urgent. Everything else, send the details and we’ll come back with a fixed price.

Call now Book a visit